Johnson County, Kansas
Registration is CLOSED for the
Fall 2009 Seminar. If you were unable to register for classes we will be
holding classes again in the Spring. Or you can click here for a listing
of organizations that may possibly be holding classes
Organizations Possibly Providing Continuing Education
IClick here for a hard copy of the brochure for the 2009 Fall Education
Seminar
Please click on the
Contractor Class Mgmt. System to renew your Johnson County Contractor License or
sign up for upcoming classes. When using a credit card for fees our credit card company no longer accepts American
Express.
Please
click here if you need instructions on how to print certificates
and/or transcript through the Contractor Class Management System.
JOHNSON COUNTY CODES CLASSES
Johnson County Contractor Licensing currently DOES NOT
accept any online education except for the organization International
Code College www.iccceu.com .
Click here for the guidelines for Non-Code Continuing Education
Course Credits.
CODE - VARIETY OF CODE COURSE ELEC - ELECTRICAL COURSE
HVAC - HEATING & AIR CONDITIONING COURSES and/or MECHANICAL OSHA - OSHA COURSE
PLUMB - PLUMBING COURSE FIRE - FIRE COURSE
MASONRY - MASONRY COURSE CONC - CONCRETE COURSE
ROOF - ROOFING COURSE NON-CODE - NON-CODE (ELECTIVE) COURSE
Johnson County
has approved the courses listed below for continuing education credit
for the year specified. If you contact the organization and the course
is not listed on our website, the course has not
been approved for credit. If the course is not listed either you or the
organization presenting the course needs to submit the form below for
approval.
Form for Requesting Continuing Education Credit (For Education taken
outside of what Johnson County provides please submit the above form.)
ACCA (AIR
CONDITIONING CONTRACTORS OF AMERICA)
2009 MECH CODE Classes
Overview of International Codes and How They Differ....(1 Hour)
NATE Review Class for Core....(4 Hours)
HVAC Training - ECM Motors (4 HOURS)
2009 DP CODE Classes
2009 PLUMB CODE Classes
Overview of International Codes and How They Differ....(1 Hour)
2009 NON-CODE Classes
2009 NON-CODE Classes
Wireless Thermostats (1 Hour)
ALLIED AIR
ENTERPRISES
2009 DM CODE Classes
2009 MECH CODE Classes
R410A Split Systems (4 Hours)
2009 NON-CODE Classes
2009 NON-CODE Classes
R410A Split Systems (2.5 Hours)
AMERICAN GROUND WATER
TRUST 2009 DM CODE Classes
2009 MECH CODE Classes
Ground Source Heat and Cool....(3 Hours)
2009 NON-CODE Classes
2009 NON-CODE Classes
Ground Source Heat and Cool....(4 Hours)
ASBESTOS CONSULTING &
TESTING 2009 CODE Classes
2009 CODE Classes
AHERA Asbestos Contractor Supervisor Initial Training (4 Hours)
2009 NON-CODE Classes
2009 NON-CODE Classes
AHERA Asbestos Contractor Supervisor Initial Training (4 Hours)
ASSOCIATED
BUILDERS & CONTRACTORS, INC.
2009 NON-CODE Classes
Confined space Competent Person Course (4 Hours)
Excavation Compentent Person Course (4 Hours)
Fall Protection Competent Course (4 Hours)
Leadership in Construction Course (4 Hours)
OSHA 30 Hour Safety (4 Hours)
OSHA 10 Hour Safety (4 Hours)
Scaffolding Competent Person Course (4 Hours)
BAC LOCAL #15
MO/KS APPRENTICESHIP & TRAINING
2009 CODE Classes
Masonry How We Do It 07-09 (6 Hours)
Masonry How We Do It 04-09 (2 Hours)
Masonry How We Do It 01-09 (2 Hours)
C&M ENTERPRISE
www.CandMEnterprises.net 2009 DE CODE Classes
2009 ELEC Classes
Grounding and Bonding - 2008 NEC (3 Hours)
Grounding and Bonding - 2008 NEC (4 Hours)
Grounding and Bonding - 2008 NEC (6 Hours)
Grounding and Bonding - 2008 NEC (8 Hours)
Swimming Pools Spas Hot Tubs Hydromassage... (6 Hours)
Swimming Pools Spas Hot Tubs Hydromassage... (4 Hours)
Swimming Pools Spas Hot Tubs Hydromassage... (3 Hours)
Swimming Pools Spas Hot Tubs Hydromassage... (2 Hours)
Grounding and Bonding of Separately Derived 2008 NEC (4 Hours)
Grounding and Bonding of Separately Derived 2008 NEC (2 Hours)
Grounding and Bonding - 2008 NEC (8 Hours)
Motors Conductors and Protection - 2008 NEC (6 Hours)
Motors Conductors and Protection - 2008 NEC (4 Hours)
Motors Conductors and Protection - 2008 NEC (3 Hours)
Analysis of Code Changes for the 2008 NEC (8 Hours)
Hazardous Locations Requirements Special... (6 Hours)
Hazardous Locations Requirements Special... (4 Hours)
Hazardous Locations Requirements Special... (3 Hours)
Electrical Requirements Natural Artifically... (2 Hours)
Electrical Provisions for Dwelling Kitchen Laundry Bath...
(2 Hours)
NEC Calcualtions under the 2008 NEC (6 Hours)
NEC Calcualtions under the 2008 NEC (4 Hours)
NEC Calcualtions under the 2008 NEC (3 Hours)
Understand Short Circuit Currents Calculations (3 Hours)
Understand Short Circuit Currents Calculations (2 Hours)
Dwelling Service and Feeder Under the 2008 NEC (6 Hours)
Dwelling Service and Feeder Under 2008 NEC (4 Hours)
Preparing for Dwelling Electric Inspections... (8 Hours)
Preparing for Dwelling Electric Inspections... (6 Hours)
Preparing for Dwelling Electric Inspections... (4 hours)
Cfm DISTRIBUTORS
2009 CODE Classes
2009 CODE Classes
R410A Refrigerant Training (2 HOURS)
Secrets of the Pro Technician (4 HOURS)
Two Stage AC and HP Training (4 HOURS)
2009 NON-CODE Classes
2009 NON-CODE Classes
Fraud Protection- Prevention for Contractors (4 HOURS)
CHEMGUARD
2009 DF CODE Classes
2009 FIRE CODE Classes
Foam System Design Application Training (8 Hours)
CITY OF TOPEKA
2009 DE CODE Classes
2009 ELEC CODE Classes
Article 680 Swimming Pools (2 Hours)
2008 NEC Code Changes (6 Hours)
CK Dorman/Zurn Pex
2009 DP CODE Classes
2009 PLUMB CODE Classes
Zurn Pex Plumbing and Radiant Heating Systems (3 Hours)
2009 DM CODE Classes
2009 MECH CODE Classes
Zurn Pex Plumbing and Radiant Heating Systems (3 Hours)
COMFORT SALES AGENCY 2009 DP CODE Classes
2009 PLUMB CODE Classes
Boilers and Hydronic Heating Systems (8 Hours)
2009 DM CODE Classes
2009 MECH CODE Classes
Boilers and Hydronic Heating Systems (8 Hours)
CROWN TECHNICAL TRAINING 2009 DE CODE Classes
2009 ELEC Classes
Basic Grounding, Art 25g and Art 100 (4 Hours)
Branch Circuits, Conductor Ampacity, Voltage Drop (6 Hours)
GOODMAN/AMANA
DISTRIBUTORS 2009 DP CODE Classes
2009 PLUMB CODE Classes
Forced Air Zoning (4 Hours)
2009 DM CODE Classes
2009 MECH CODE Classes
Forced Air Zoning (4 Hours)
HOME BUILDERS ASSOCIATION
www.kchba.org 2009 CODE Classes
2009 CODE Classes
Certified Aging in Place II (4 Hours)
2009 NON-CODE Classes
2009 NON-CODE Classes
Business Management for Building Professionals (4 Hours)
Certified Aging in Place Part I (4 Hours)
Certified Aging in Place II (4 Hours)
INTERNATIONAL CODE COLLEGE
www.iccceu.com
2009 CODE Classes
2009 CODE Classes
Residential Footing and Foundations (2 Hours)
Roof Framing (2 Hours)
Duplex and Townhouse Construction (2 Hours)
Code Administration For Contractors (2 Hours)
2009 DE CODE Classes
2009 ELEC CODE Classes
Electrical Safety Part II (2 Hours)
Electrical Safety Part I (2 Hours)
Short Circuit Currents and Calculations (2 Hours)
Outlet Device and Box Fill Calculations (2 Hours)
Framing For Plumbers Mechanics and Electricians (2 Hours)
Conduit Fill and Voltage Drop Calculations (2 Hours)
Conductor Sizing and Overcurrent Protection (2 Hours)
2009 DP CODE Classes
2009 PLUMB CODE Classes
Framing For Plumbers Mechanics and Electricians (2 Hours)
2009 DM CODE Classes
2009 MECH CODE Classes
Thermostatic Valve Troubleshooting (2 Hours)
Thermostatic Valve Operation (2 Hours)
Framing For Plumbers Mechanics and Electricians (2 Hours)
2009 Non-Code Classes
2009 NON-CODE Classes
OSHA Recordkeeping (2 Hours)
OSHA for Construction (4 Hours)
Making a Profit in Remodeling (2 Hours)
Job Costing (2 Hours)
Custom Building vs Remodeling (2 Hours)
INTERNATIONAL CODE COUNCIL
www.iccsafe.org
2009 CODE Classes
2009 CODE Classes
2006 IBC Educational and Institutional Occupancies (6 Hours)
2009 IECC Fundamentals (6 Hours)
2009 IRC Significant Changes (6 Hours)
2009 IBC Significant Changes (6 Hours)
2009 IBC Update (6 Hours)
2006 IRC Performing Residential Building Inspections (8 Hours)
2006 IRC High Wind and Flood Residential Construction (6 Hours)
2006 IRC Performing Residential Plumbing Inspections (8 Hours)
The Permit Counter Skills and Strategies for the Front Line (4 Hours)
2009 IEBC Update (3 Hours)
2009 IBC Update (3 Hours)
2009 IRC Update (3 Hours)
2009 IECC Update (3 Hours)
2009 DP CODE Classes
2009 PLUMB CODE Classes
2009 IRC Significant Changes (6 Hours)
2009 IFGC Update (3 Hours)
2009 IPC Update (3 Hours)
2009 DM CODE Classes
2009 MECH CODE Classes
2009 IRC Significant Changes (6 Hours)
2006 Performing Residential Mechanical Inspections (6 Hours)
2009 IFGC Update (3 Hours)
2009 IMC Update (3 Hours)
2009 DE CODE Classes
2009 ELEC CODE Classes
2009 IRC Significant Changes (6 Hours)
Performing Residential Electrical Inspections (6 Hours)
2009 DF CODE Classes
2009 FIRE CODE Classes
2009 IFC Significant Changes (6 Hours)
2009 IFC Update (3 Hours)
2006 IFC Performing Commercial Fire Plan Reviews (8 Hours)
INDEPENDENT ELECTRICAL CONTRACTORS, INC. 2009 NON-CODE Classes
2009 NON-CODE Classes
OSHA 10 Hour Safety Construction (4 Hours)
JOHNSON COUNTY
CONTRACTOR LICENSING
2009 CODE and NON-CODE Classes
Make-Up Education Flyer (Various)
Spring 2009 Brochure (Various Hours)
KEN LANDES
2009 CODE and NON-CODE Classes
What Every Contractor Should Know - 3-18-09 (8 Hours)
2009 CODE and NON-CODE Classes
What Every Contractor Should Know - 3-18-09 (8 Hours)
2009 CODE Classes
43rd Annual Concrete Technology Course (8 Hours)
MIKE HOLT ENTERPRISES
2009 ELEC CODE Classes
2008 NEC Changes (8 Hours)
2008 Grounding vs Bonding (8 Hours)
2008 Changes to the NEC Part 1 (4 Hours)
2008 Changes to the NEC Part 2 (4 Hours)
NATIONAL ASSOCIATION OF
HOME BUILDERS (NAHB)
2009 CODE Classes
Top 10 Framing Errors and 5 Ways to Avoid Them (1.5 Hours)
2009 NON-CODE Classes
Basic Construction Management During Tough Times (1.5 Hours)
Referral Heaven-Warranty Process Management (1.5 Hours)
The Builders Remodelers Guide to Mastering Quickbooks (1.5 Hours)
NATIONAL CODE
SEMINARS 2009 DE CODE Classes
2009 ELEC Classes
Introduction to the 2008 National Electrical Code (8 Hours)
NATIONAL COMFORT
INSTITUTE 2009 DM CODE Classes
2009 MECH Classes
Introduction to Air Balancing 101 (8 Hours)
Intermediate Air Balancing 201 (8 Hours)
Light Commercial Air Balancing 301 (8 Hours)
Carbon Monoxide Analysis (8 Hours)
Combustion Efficiency (6 Hours)
Performaxx University (8 Hours)
NATIONAL FIRE
SPRINKLER ASSOCIATION (NFSA) 2009 DF CODE Classes
2009 FIRE Classes
Copper Tube for Sprinkler Systems (1.5 Hours)
Frequently Asked Questions Part IV (1.5 Hours)
Questions on Single Family Sprinkler Installations (1.5 Hours)
2009 DP CODE Classes
2009 PLUMB Classes
Frequently Asked Questions Part IV (1.5 Hours)
O'CONNOR COMPANY
2009 MECH CODE Classes
GEO Thermal 101 (6.5 Hours)
SMACNA-KC SHEET METAL
LOCAL #2 KANSAS CITY
2009 MECH CODE Classes
12 Hour HVAC Fire Life Safety (8 Hours)
SOUTHWIRE COMPANY
2009 ELEC CODE Classes
Southwires Cable Innovation Road Show (2 HOURS)
THE BUILDERS' ASSOCIATION
www.buildersassociation.com 2009 NON-CODE Classes
2009 NON-CODE Classes
Business Killers - Avoiding the Six Mistakes....(2 Hours)
2009 Executive Academy - Growth Strategies... (3 Hours)
Tax Law Changes for Real Estate and Construction....(1.5 Hours)
OSHA (4 Hours)
Construction Estimating (4 Hours)
Beginning Print Reading (4 Hours)
Intermediate Print Reading (4 Hours)
Advanced Print Reading (4 Hours)
Advanced Mechanics Liens (3 Hours)
2009 Executive Academy - Growth Strategies...(4 Hours)
LEED - Whats Goin On... (1 Hour)
Accident Prevention (4 Hours)
LEED Accredited Professional (4 Hours)
OSHA 30 Hour Construction Outreach Course (4 Hours)
OSHA Confined Space Entry Course (4 Hours)
OSHA Excavation Competent Person Course (4 Hours)
OSHA Focus Four Hazard Course (4 Hours)
OSHA Fall Protection Course (4 Hours)
OSHA Forklift Operator Course (4 Hours)
OSHA Scaffolding Course (4 Hours)
THE CONCRETE PROMOTIONAL
GROUP
www.concretepromotion.com 2009 CODE Classes
2009 CODE Classes
Pervious Concrete Pavements Certification (2 Hours)
Pervious Concrete for Stormwater Mitigation (2 Hours)
Jo hnson
County Contractor Licensing hosted The ABC's of BMPs, Erosion and
Sediment Control Done Right and Certified Erosion and Sediment Control Inspector
Training on February 20 and March 31, 2009. To find out your certification results please
click here .
If you are in need of continuing education credits, please click here for a listing
of Organizations who possibly may be providing continuing education.
Organizations Possibly Providing Continuing Education
Please
click here if you need instructions on how to print certificates
and/or transcript through the Contractor Class Management System.
home |
building code
|
planning department
| site map
JOHNSON COUNTY CONTRACTOR LICENSING contractor.licensing@jocogov.org
This page last updated on:
November 05, 2009
